Proximal retention grooves are most necessary to provide resistance for proximal-occlusal silver amalgam restorations when the

The placement of a retentive pin in the
proximal regions of posterior teeth would
MOST likely result in periodontal
ligament perforation in the

mesial of a mandibular first molar.
NDEB released questions set 1

The placement of a retentive pin in the proximal regions of posterior teeth would MOST likely result in periodontal ligament perforation in the

mesial of a mandibular first molar
NDEB released questions 2012 online set 1

Interproximal reduction of the mesial of the lower deciduous cuspids is indicated to

provide space for alignment of the permanent incisors when crowding is 1-3mm.
NDEB released questions part 2 set 6

Proximal retention grooves are most necessary to provide resistance for proximal-occlusal silver amalgam restorations when the

occlusal extension is narrow faciolingually relative to the proximal extension
NDEB released questions part 2 set 11

An open proximal contact on an amalgam restoration could have been caused by
1. inadequate wedging.
2. overtightening the matrix band.
3. inadequate condensing forces.
4. simultaneous placement of adjacent proximal restorations.

(1) (2) (3)
NDEB released questions part 2 set 12

To minimize fractures of amalgam restorations in deciduous teeth, cavity preparations should have
1. concave pulpal floors.
2. rounded axiopulpal line angles.
3. rounded proximal retention grooves.
4. lateral walls parallel to the external surface of the tooth.

(2) (3) (4)
NDEB released questions set 4

The placement of a retentive pin in the proximal regions of posterior teeth would MOST likely result in periodontal ligament perforation in the

mesial of a mandibular first molar.
NDEB released questions set 10

The placement of a retentive pin in the proximal regions of posterior teeth would most likely result in periodontal ligament perforation in the

mesial of a mandibular first molar
Planets 35

An open proximal contact on an amalgam restoration could have been caused by
1. inadequate wedging.
2. overtightening the matrix band.
3. inadequate condensing forces.
4. simultaneous placement of adjacent proximal restorations.

All of the above.
Planets 28

Which is used for the removal of plaque in the proximal region?

Dental floss
Assist 2

Proximal retention grooves are most necessary to provide resistance for proximal-occlusal silver amalgam restorations when the

restoration is a pin-retained cusp replacement

occlusal extension is narrowfaciolingually relative to the proximal extension.

occlusal extension is wide faciolingually relative to the proximal extension.

bonded amalgam technique is not being used

0 explanations

Similar questions:

The placement of a retentive pin in the
proximal regions of posterior teeth would
MOST likely result in periodontal
ligament perforation in the

The placement of a retentive pin in the proximal regions of posterior teeth would MOST likely result in periodontal ligament perforation in the

Interproximal reduction of the mesial of the lower deciduous cuspids is indicated to

Proximal retention grooves are most necessary to provide resistance for proximal-occlusal silver amalgam restorations when the

An open proximal contact on an amalgam restoration could have been caused by
1. inadequate wedging.
2. overtightening the matrix band.
3. inadequate condensing forces.
4. simultaneous placement of adjacent proximal restorations.

To minimize fractures of amalgam restorations in deciduous teeth, cavity preparations should have
1. concave pulpal floors.
2. rounded axiopulpal line angles.
3. rounded proximal retention grooves.
4. lateral walls parallel to the external surface of the tooth.

The placement of a retentive pin in the proximal regions of posterior teeth would MOST likely result in periodontal ligament perforation in the

The placement of a retentive pin in the proximal regions of posterior teeth would most likely result in periodontal ligament perforation in the

An open proximal contact on an amalgam restoration could have been caused by
1. inadequate wedging.
2. overtightening the matrix band.
3. inadequate condensing forces.
4. simultaneous placement of adjacent proximal restorations.

Which is used for the removal of plaque in the proximal region?

Member's benefits

Sign In

Proximal retention grooves are most necessary to provide resistance for proximal-occlusal silver amalgam restorations when the

restoration is a pin-retained cusp replacement

occlusal extension is narrowfaciolingually relative to the proximal extension.

occlusal extension is wide faciolingually relative to the proximal extension.

bonded amalgam technique is not being used

0 explanations

Similar questions:

The placement of a retentive pin in theproximal regions of posterior teeth wouldMOST likely result in periodontalligament perforation in the

The placement of a retentive pin in the proximal regions of posterior teeth would MOST likely result in periodontal ligament perforation in the

Interproximal reduction of the mesial of the lower deciduous cuspids is indicated to

Proximal retention grooves are most necessary to provide resistance for proximal-occlusal silver amalgam restorations when the

An open proximal contact on an amalgam restoration could have been caused by1. inadequate wedging.2. overtightening the matrix band.3. inadequate condensing forces.4. simultaneous placement of adjacent proximal restorations.

To minimize fractures of amalgam restorations in deciduous teeth, cavity preparations should have 1. concave pulpal floors. 2. rounded axiopulpal line angles. 3. rounded proximal retention grooves. 4. lateral walls parallel to the external surface of the tooth.

The placement of a retentive pin in the proximal regions of posterior teeth would MOST likely result in periodontal ligament perforation in the

The placement of a retentive pin in the proximal regions of posterior teeth would most likely result in periodontal ligament perforation in the

An open proximal contact on an amalgam restoration could have been caused by1. inadequate wedging.2. overtightening the matrix band.3. inadequate condensing forces.4. simultaneous placement of adjacent proximal restorations.

Which is used for the removal of plaque in the proximal region?

The placement of a retentive pin in the
proximal regions of posterior teeth would
MOST likely result in periodontal
ligament perforation in the

An open proximal contact on an amalgam restoration could have been caused by
1. inadequate wedging.
2. overtightening the matrix band.
3. inadequate condensing forces.
4. simultaneous placement of adjacent proximal restorations.

To minimize fractures of amalgam restorations in deciduous teeth, cavity preparations should have
1. concave pulpal floors.
2. rounded axiopulpal line angles.
3. rounded proximal retention grooves.
4. lateral walls parallel to the external surface of the tooth.

An open proximal contact on an amalgam restoration could have been caused by
1. inadequate wedging.
2. overtightening the matrix band.
3. inadequate condensing forces.
4. simultaneous placement of adjacent proximal restorations.