Similar questions:
In porcelain fused to metal crowns, the bond between the materials is
mainly chemical.NDEB released questions part 2 set 3
Which of the following statement is/are true regarding light curing of a composite resin?
1. The curing tip should be within 2mm of the material.
2. Light intensity is inversely proportional to the distance from the material.
3. A darker shade of material requires longer curing time.
4. Curing of composite resin cannot occur through enamel.
(1) (2) (3)
NDEB released questions part 2 set 12
The following factors effect polymerization of visible light cured composite resins:
1. Shade.
2. Material thickness.
3. Proximity of light source.
4. Temperature of the material.
(1) (2) (3)
NDEB released questions set 8
The dimensional stability of polyether impression material is considered to be good EXCEPT if the material is
allowed to absorb water after settingNDEB released questions set 8
Success of an endosseous dental implant is dependent upon
1. biocompatibility of the material.
2. design.
3. a period of non-function.
4. immediate loading.
(1) (2) (3)
NDEB released questions set 9
The dimensional stability of polyether impression material is considered to be good EXCEPT if the material is
allowed to absorb water after setting.NDEB released questions set 12
The material of choice for obturating the root canal system of a primary tooth is
zinc-oxide eugenol.Planets 35
Effective tissue displacement with elastic impression materials can be accomplished by
1. injection of the material into the gingival sulcus.
2. placement of chemical-impregnated cords into the gingival sulcus.
3. electrosurgical means.
4. a firm tray material.
All of the above
Planets 31
The dimensional stability of polyether impression material is considered to be good EXCEPT if the material is
allowed to absorb water after settingPlanets 29
When working with light-cured conposites, the derker the shade of the material the______ the curring time required
longerAssist 6
Why is the mixed zink oxide-eugenol rolled into a small ball before placing the material into the cavity?
To make the placement of material easierAssist 6
0 explanations
Explanations are useful to guide through learning process and confirm that the correct answer is indeed correct.
Only registered users can add explanations