Violation
Pins for cusp replacement should ideally be placed
a minimum of 0.5-1.0mm from the dentino-enamel junction
within enamel.
at the dentino-enamel junction.
a minimum of 1.5-2.0mm from the dentino-enamel junction.
Pins for cusp replacement should ideally be placed
a minimum of 0.5-1.0mm from the dentino-enamel junction
within enamel.
at the dentino-enamel junction.
a minimum of 1.5-2.0mm from the dentino-enamel junction.