In order to achieve a proper interproximal contact when using a spherical alloy, which of the following is/are essential? 1. A larger sized condenser. 2. A thinner matrix band. 3. An anatomical wedge. 4. Use of mechanical condensation.

A laboratory remount of processed dentures is done in order to correct occlusal disharmony produced by errors primarily in the

processing of acrylic.
NDEB released questions part 2 set 1

It is advisable to polish any restorative material as smoothly as possible in order to prevent

accumulation of plaque
NDEB released questions part 2 set 2

In removable partial denture, major connectors should begin 3-6mm from the free gingival margin in order to

prevent inflammation of the gingival tissues.
NDEB released questions part 2 set 3

Which of the following drugs should NOT be administered to a patient in order to alleviate symptoms of an acute asthmatic attack?

Hydrocortisone
NDEB released questions part 2 set 4

Aspiration is carried out prior to a local anaesthetic injection in order to reduce the

possibility of intravascular administration.
NDEB released questions part 2 set 5

A 6-year old patient has a larger than average diastema between the maxillary central incisors. The radiographic examination shows a mesiodens. In order to manage the diastema, you should extract the mesiodens

as soon as possible
NDEB released questions part 2 set 6

The elastic limit of a material is the greatest load to which a material can be subjected to in order that it will

return to its original dimension.
NDEB released questions part 2 set 6

Clasps should be so designed that upon insertion or removal of a partial denture, the reciprocal arms contact the abutment teeth when the retentive arms pass over the height of contour in order to

provide needed support to abutment teeth during a period of added stress.
NDEB released questions part 2 set 7

A 6 year old patient has a larger than average diastema between the maxillary central incisors. The radiographic examination shows a mesiodens. In order to manage the diastema, you should extract the mesiodens

as soon as possible
NDEB released questions part 2 set 10

Major connectors of a cast maxillary partial denture are beaded at the periphery in order to

improve tissue contact
NDEB released questions part 2 set 11

A laboratory remount of processed dentures is done in order to correct occlusal disharmony produced by errors primarily in the

processing of acrylic.
NDEB released questions part 2 set 11

Amalgam is condensed in order to
1. adapt the amalgam to the cavity walls, floor and margins.
2. develop a uniform compact mass with minimum voids.
3. reduce excess mercury content.
4. overbuild the restoration to allow ‘carve back’ to eliminate the mercury-rich outer layer.

All of the above
NDEB released questions part 2 set 12

In patients with advanced periodontitis, mobile teeth should be splinted in order to

None of the above.
NDEB released questions part 2 set 15

Heated impression modeling compound is tempered in warm water before placement in the mouth in order to

avoid burning the soft tissues.
NDEB released questions set 5

After processing, complete dentures on the original stone casts are rearticulated in order to correct occlusal disharmony produced by
1. flasking and processing procedures.
2. strained jaw relation records.
3. errors in registering of centric jaw relation.

(1) only
NDEB released questions set 6

In order to achieve a proper interproximal
contact when using a spherical alloy, which of the following is/are essential?
1. A larger sized condenser.
2. A thinner matrix band.
3. An anatomical wedge.
4. Use of mechanical condensation.

(2) and (4)

(1) (2) (3)

(1) and (3)

All of the above

(4) only

0 explanations

Similar questions:

A laboratory remount of processed dentures is done in order to correct occlusal disharmony produced by errors primarily in the

It is advisable to polish any restorative material as smoothly as possible in order to prevent

In removable partial denture, major connectors should begin 3-6mm from the free gingival margin in order to

Which of the following drugs should NOT be administered to a patient in order to alleviate symptoms of an acute asthmatic attack?

Aspiration is carried out prior to a local anaesthetic injection in order to reduce the

A 6-year old patient has a larger than average diastema between the maxillary central incisors. The radiographic examination shows a mesiodens. In order to manage the diastema, you should extract the mesiodens

The elastic limit of a material is the greatest load to which a material can be subjected to in order that it will

Clasps should be so designed that upon insertion or removal of a partial denture, the reciprocal arms contact the abutment teeth when the retentive arms pass over the height of contour in order to

A 6 year old patient has a larger than average diastema between the maxillary central incisors. The radiographic examination shows a mesiodens. In order to manage the diastema, you should extract the mesiodens

Major connectors of a cast maxillary partial denture are beaded at the periphery in order to

A laboratory remount of processed dentures is done in order to correct occlusal disharmony produced by errors primarily in the

Amalgam is condensed in order to
1. adapt the amalgam to the cavity walls, floor and margins.
2. develop a uniform compact mass with minimum voids.
3. reduce excess mercury content.
4. overbuild the restoration to allow ‘carve back’ to eliminate the mercury-rich outer layer.

In patients with advanced periodontitis, mobile teeth should be splinted in order to

Heated impression modeling compound is tempered in warm water before placement in the mouth in order to

After processing, complete dentures on the original stone casts are rearticulated in order to correct occlusal disharmony produced by
1. flasking and processing procedures.
2. strained jaw relation records.
3. errors in registering of centric jaw relation.

Member's benefits

Sign In

In order to achieve a proper interproximalcontact when using a spherical alloy, which of the following is/are essential?1. A larger sized condenser.2. A thinner matrix band.3. An anatomical wedge.4. Use of mechanical condensation.

(2) and (4)

(1) (2) (3)

(1) and (3)

All of the above

(4) only

0 explanations

Similar questions:

A laboratory remount of processed dentures is done in order to correct occlusal disharmony produced by errors primarily in the

It is advisable to polish any restorative material as smoothly as possible in order to prevent

In removable partial denture, major connectors should begin 3-6mm from the free gingival margin in order to

Which of the following drugs should NOT be administered to a patient in order to alleviate symptoms of an acute asthmatic attack?

Aspiration is carried out prior to a local anaesthetic injection in order to reduce the

A 6-year old patient has a larger than average diastema between the maxillary central incisors. The radiographic examination shows a mesiodens. In order to manage the diastema, you should extract the mesiodens

The elastic limit of a material is the greatest load to which a material can be subjected to in order that it will

Clasps should be so designed that upon insertion or removal of a partial denture, the reciprocal arms contact the abutment teeth when the retentive arms pass over the height of contour in order to

A 6 year old patient has a larger than average diastema between the maxillary central incisors. The radiographic examination shows a mesiodens. In order to manage the diastema, you should extract the mesiodens

Major connectors of a cast maxillary partial denture are beaded at the periphery in order to

A laboratory remount of processed dentures is done in order to correct occlusal disharmony produced by errors primarily in the

Amalgam is condensed in order to1. adapt the amalgam to the cavity walls, floor and margins.2. develop a uniform compact mass with minimum voids.3. reduce excess mercury content.4. overbuild the restoration to allow ‘carve back’ to eliminate the mercury-rich outer layer.

In patients with advanced periodontitis, mobile teeth should be splinted in order to

Heated impression modeling compound is tempered in warm water before placement in the mouth in order to

After processing, complete dentures on the original stone casts are rearticulated in order to correct occlusal disharmony produced by 1. flasking and processing procedures. 2. strained jaw relation records. 3. errors in registering of centric jaw relation.

In order to achieve a proper interproximal
contact when using a spherical alloy, which of the following is/are essential?
1. A larger sized condenser.
2. A thinner matrix band.
3. An anatomical wedge.
4. Use of mechanical condensation.

Amalgam is condensed in order to
1. adapt the amalgam to the cavity walls, floor and margins.
2. develop a uniform compact mass with minimum voids.
3. reduce excess mercury content.
4. overbuild the restoration to allow ‘carve back’ to eliminate the mercury-rich outer layer.

After processing, complete dentures on the original stone casts are rearticulated in order to correct occlusal disharmony produced by
1. flasking and processing procedures.
2. strained jaw relation records.
3. errors in registering of centric jaw relation.